Item code |
BLCMJ2030 |
BLCMJ2540 |
BLCMJ3350 |
Max glass processing size |
2000 x 3000mm |
2500×4000mm |
3300mm×5000mm |
Min glass processing size |
300×300mm |
300×300mm |
300 x 400mm |
Overall dimension |
8400×1500×3100mm |
10500×1500×3100mm |
11000×2200×4100mm |
Abrasive wheel width |
10/12/15mm |
Processing speed |
15-45m/min |
Power consumption |
3AC380V 50HZ 15KW |
Gas source requirements |
0.6MPa 1.5m³/min |
Air supply flow |
0.2m3/min |
Glass thickness |
3-19mm |
Glass transmission speed |
30m/min |
Edge deleting speed |
0-15m/min |
Air pressure |
≥0. 8mpa |
Total Power |
3P 380V 50HZ 15KW |
Note:Extra-large specifications are customizable |

1.This model is suitable for removing the film from tempered and non-tempered glass.
2. This model is suitable for the removal of various LOW-E films, double-silver films and triple-silver film layers.
3. The large and small pieces of flash glass are automatically removed at one positioning. The number of times the film is removed can be manually selected, and the film removal effect is better.
4. Remove the film from the glass with large and small flash edges, the film from the ultra-wide film layer, and ensure that the grinding wheel tracks overlap to guarantee that there is no residue in the film layer.
5. The film removal machine is suitable for removing films from rectangular glass and various irregular-shaped glass (for specific forms, please refer to the operation screen).
6. If customers have grinding requirements for special-shaped glass, our company will provide grinding program debugging and trial production.
7. The grinding wheel head is equipped with a vacuum dust removal device to protect the safety of workers and reduce dust pollution.
8. The grinding wheel spindle motor adopts servo drive, which has a strong demolding force, a stable demolding speed, and automatically adjusts the edge and corner grinding speed.
1. The main shaft speed of the grinding wheel can be matched and adjusted according to the type of film layer and the effect of film removal to ensure the best film removal effect.
2. This machine is equipped with an automatic grinding system for diamond pens to ensure the film removal capacity of the grinding wheels and achieve a clean film removal effect.
3. The servo controls the grinding feed of the grinding wheel and is equipped with a safety program to prevent the grinding wheel from grinding out and damaging the rubber roller.
4. The loading and unloading segments can run asynchronously, enhancing production efficiency and featuring full servo control.
5. The film removal main unit adopts wear-resistant polyurethane belts, which ensure smooth transmission, low noise and long service life.
6. The film removal machine is equipped with high-power rotary suction cups, which ensure firm and reliable glass adhesion, smooth operation and better grinding effect.
7. All the main drives of the film removal machine are driven by servo motors, featuring high transmission grinding accuracy and strong force.
8. The film removal machine can be used independently or connected in conjunction with the hollow wire.
When the film removal machine is connected to the production line for use, an operation switch is set on the operation screen, which is equipped with a continuous film removal switch. For small pieces of glass (with a length of less than 2000), the first piece is activated by stepping on the foot switch to start film removal. Once there is glass on the feeding rack, it will be automatically conveyed for film removal without the need to step on the foot switch again, thereby improving work efficiency and the service life of the foot switch.
10.Add a photoelectric switch at the input end of the cleaning machine in the hollow production line; If the output terminal is in the online state and the continuous and interval switches are in the connected state; The first slice, the second slice or the third slice can be selected to adapt to whether the production line is on-board or off-board lamination. (1) For the first production line of the two pieces of laminated glass inside the board, the white glass should be cleaned first. When the white glass leaves the cleaning machine, the photoelectric switch coated glass added will be automatically transferred. If it is a three-glass two-chamber type, the photoelectric switch added to the cleaning machine needs to transmit two white glasses first, and then the glass after the film is removed will be automatically transmitted. After the first piece of the two-glass outer laminated plate is completely de-coated, the de-grinding machine will automatically transfer it to the cleaning machine. The second piece of glass that has been de-coated will wait at the output end of the de-grinding machine. When a white piece of glass is transferred, the second piece of de-coated glass will be automatically transferred to the cleaning machine. After the first coated glass of the three-glass two-cavity outer laminated plate is completely transferred, the de-coated glass on the de-grinding machine will wait at the output end of the de-grinding machine. After the two pieces of white glass are conveyed, the second coated glass is automatically conveyed to enter the next working cycle.






1. Who are we?
We are based in Jinan and Qingdao, China. Founded in 2019, we export to markets in Eastern Europe(28%), North America(19%), South America(23%), Mid East(12%), Southeast Asia(2%), Eastern Asia(2%), Western Europe(2%), Africa(1%), Oceania(1%), Central America(1%), Northern Europe(3%), Southern Europe(2%), South Asia(2%) and the Domestic Market(2%). Our office has a total of approximately 8-15 team members.
2. How can we guarantee quality?
Always provide a pre-production sample before bulk production.
Always conduct a final inspection before shipment.
3. What can you buy from us?
Insulated Glass Production Line
Glass Cutting Machine
Glass Washing Machine
Glass Edging Machine
Glass Tempering Furnace
Laminated Glass Production Line
Window and Door Machine
Consumables
4. Why should you buy from us, not from other suppliers?
(1) Over 20 years of production experience.
(2) Excellent Enginnering team.
(3) Professional after-sales service team.
(4) Products exported to many countries and regions.
(5) Excellent and stable product quality.
5. What services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
Accepted Payment Currency: USD, EUR, CNY
Accepted Payment Type: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Western Union, Cash, Escrow
Languages Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, Arabic, French, Russian, Korean, Hindi, Italian